Has anyone run Miro 111's in 19"?
 

Is it possible? Would love to see pics. 18's are usually my max for fourth-gen F-bodies, but really wondering what these look like in 19.

Bonus points if they are black wheels on a T/A :)

TheNutDriver posted this a while back of his buddies Trans Am with 19s


https://cimg2.ibsrv.net/gimg/ls1tech...cec182ed9d.jpg

Nice, thank you :)

what offset did you use?

These aren't mine, but I think most people go with a 38-42 range on these on a 9.5" wide rim

What would give the most concave look to the wheel? And does the front need to be a different offset than the back?

Wheels like Forgestar have different concave depths, for instance semi-concave and deep concave, but Miro 111's only came in one concave depth.
Miro 111's that are 9.5" wide in front and back use the same offset in that 38-42 range.

I spoke with one of the salesman at Miro today and he recommended a 19 by 9 and a half with a 33 offset do you think this should be good all-around?

Yeah, I wish these were just a touch more concave, but for the price (as compared to, say, the Forgestars) it's hard to beat.

The 19s above look pretty good... first time I've ever considered wheels that big for my T/A.

If you went that low you may have to roll your fenders, otherwise it will be very close.
I bought these wheels about 5 years ago, and I had to look alllll over to find some 38 offset in 18/19 111's bc most places where out. Did the salesman mention if he had 38 offset on hand?

https://lesstalkmorewheels.com/cart

picked up a set of these that came of a C6 corvette from my buddy he hit a hole and bent the rim im looking for the fourth
the ones he has are 19x9.5 5x120 i found the rim but idk what ET40 mean it also had the option of ET20 he bent the front rim btw

Hi,

A bit of a revival here, but i noticed this thread as it was near the top of the 1st wheel and tyre page and i hadnt seen it first time round.... My friends car in the photo posted above with the 19's are Front +38 offset in a 19x8.5 and the rears are +45 offset in a 19x9.5.