CCW 505As and CTS-V Calipers
01-29-2018, 10:52 PM
#1
Teching In
Thread Starter
CCW 505As and CTS-V Calipers Hello,
I am hoping someone can help me out with some info.
I have a 2000 Trans Am and its time I get new wheels and tires.
I am looking at getting 18" CCW 505A wheels for it, probably 18x10 in the front and 18x11 in the rear.
I know those sizes fit with no issues with the stock calipers but what I haven't been able to find even after much searching is if I would be able to install the 4 piston CTS-V calipers on the front and have the wheels fit. I know that a different offset is required to clear the CTS-V calipers but I haven't been able to find information on what the offset would be with the 505A wheels.
Does anyone personally have this setup or know what the measurements would be?
Thanks,
Steve
I am hoping someone can help me out with some info.
I have a 2000 Trans Am and its time I get new wheels and tires.
I am looking at getting 18" CCW 505A wheels for it, probably 18x10 in the front and 18x11 in the rear.
I know those sizes fit with no issues with the stock calipers but what I haven't been able to find even after much searching is if I would be able to install the 4 piston CTS-V calipers on the front and have the wheels fit. I know that a different offset is required to clear the CTS-V calipers but I haven't been able to find information on what the offset would be with the 505A wheels.
Does anyone personally have this setup or know what the measurements would be?
Thanks,
Steve
