Offset Question...
Thread Starter
TECH Enthusiast
Joined: Jul 2005
Posts: 732
Likes: 0
From: Herndon, VA
Offset Question... I'm looking at 18 x 10"-10.5" rims for the back, and expect the total cross section to be close to 12". My quesion for those of you who've put big rims on the back is what offset would I need for the 10" rim to keep things inside the fender, and is there enough back space to do it? I'm looking at g-Force DRs 295/35/18's (26.2 OD, only 1/10 off stock, right?)
Thx
Thx
It also depends on the rim, because if you are going with a corvette style rim in that wide, usually 50-55 offset is optimal.
As for tire size, that will work, a 295/35-18 has 26.13 overall diameter, while a stock either 245/50-16 or 275/40-17 has overall diameter of 25.66
As for tire size, that will work, a 295/35-18 has 26.13 overall diameter, while a stock either 245/50-16 or 275/40-17 has overall diameter of 25.66
Thread Starter
TECH Enthusiast
Joined: Jul 2005
Posts: 732
Likes: 0
From: Herndon, VA
Originally Posted by Zymosis
It also depends on the rim, because if you are going with a corvette style rim in that wide, usually 50-55 offset is optimal.
As for tire size, that will work, a 295/35-18 has 26.13 overall diameter, while a stock either 245/50-16 or 275/40-17 has overall diameter of 25.66
As for tire size, that will work, a 295/35-18 has 26.13 overall diameter, while a stock either 245/50-16 or 275/40-17 has overall diameter of 25.66
