LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Wheels & Tires (https://ls1tech.com/forums/wheels-tires-17/)
-   -   305-30-19 ps2's (https://ls1tech.com/forums/wheels-tires/821724-305-30-19-ps2s.html)

flynbya2 Nov 27, 2007 08:14 PM

305-30-19 ps2's
 
I have two pilot sport ps2's.

One has been plugged and patched from the inside (patch not near sidewall),the other has a gouge out of the lip protector,about 1" in length
They have between 7-8/32's tread depth left

Bought them for my car but never installed,money tight right now

Looking for XXX OBOplus whatever fees apply,this is less than half price for lots of fine tread

$325 OBO +yada,yada,yada..
http://memimage.cardomain.net/member...9_203_full.jpg


http://memimage.cardomain.net/member...9_207_full.jpg

http://memimage.cardomain.net/member...9_208_full.jpg

http://memimage.cardomain.net/member...9_209_full.jpg

flynbya2 Nov 27, 2007 08:15 PM

These have 8/32's across the outer two valleys,and 7/32's on the inner valley on both tires.I am not sure,but I want to say even wear as they are both wearing the same........could there be a little less tread on the inside originally?
I say that because you can get a MUCH smaller reading in one of the smaller valleys on the edge.But there is still plenty 'O tread:D

Here's the chunk out of the other lip protector:

http://memimage.cardomain.net/member...9_204_full.jpg

http://memimage.cardomain.net/member...9_205_full.jpg

http://memimage.cardomain.net/member...9_206_full.jpg

flynbya2 Nov 27, 2007 08:19 PM


Originally Posted by flynbya2 (Post 8201585)
These have 8/32's across the outer two valleys,and 7/32's on the inner valley on both tires.I am not sure,but I want to say even wear as they are both wearing the same.

As I read this is see that it appears I am saying the two outside grooves are 8 and the middle is 7.That is not what I meant to say
The two valleys on one side of the tire measure 8mm,the one on the other side measures 7mm

But both tires the same...

flynbya2 Nov 28, 2007 12:04 PM

rubba

flynbya2 Dec 7, 2007 01:44 PM

Don't be skeered:)

sammyb Dec 7, 2007 05:25 PM

i thought about it but I am going to get the nitto's. I just want new stuff. I know these tires are bad ass but for $150 more I get new ones. thanks for the offer.

flynbya2 Jan 29, 2008 12:57 PM


Originally Posted by sammyb (Post 8261078)
i thought about it but I am going to get the nitto's. I just want new stuff. I know these tires are bad ass but for $150 more I get new ones. thanks for the offer.

Heck, for 300 more you can get a full set of veredestein's!

Apples and oranges though

TTT with a price reduction

$ 350 OBO + applicable fees and costs!!!

Let's move these out!!! I can only go so low fellas!!:bang:

flynbya2 Jan 30, 2008 12:35 PM

TTT again

Stang's Bane Jan 30, 2008 01:45 PM

The main reason the inner tread would be more shallow than the outer is overinflation.

Not a problem, just thought I would point that out.

flynbya2 Jan 30, 2008 04:20 PM


Originally Posted by Stang's Bane (Post 8601663)
The main reason the inner tread would be more shallow than the outer is overinflation.

Not a problem, just thought I would point that out.

Not exactly what I meant to say,here I tried to clear it up.


Originally Posted by flynbya2 (Post 8201585)
These have 8/32's across the outer two valleys,and 7/32's on the inner valley on both tires.I am not sure,but I want to say even wear as they are both wearing the same........could there be a little less tread on the inside originally?
I say that because you can get a MUCH smaller reading in one of the smaller valleys on the edge.But there is still plenty 'O tread:D


Originally Posted by flynbya2 (Post 8201630)
As I read this is see that it appears I am saying the two outside grooves are 8 and the middle is 7.That is not what I meant to say
The two valleys on one side of the tire measure 8mm,the one on the other side measures 7mm

But both tires the same...

Above here is a better explanation,you can see 3 deep grooves on the tire,then about an 1-1/2" infrom the edge a smaller jagged groove.That groove you can get a much smaller reading(maybe 6 or so off the top of my head,I don't remember).The next large groove which is nearer the center of the tire is the 7.But the other two,one of which is also near the center of the tire,are both 8's.

I don't think there was an overinflation issue with these tires.Even if there was,there is still well over 80% tread left,as they come new with 9/32"

flynbya2 Jan 31, 2008 05:53 PM

Great tires here

flynbya2 Feb 2, 2008 12:37 PM

TTT again

flynbya2 Feb 9, 2008 12:34 PM

Bump^^^

flynbya2 Feb 15, 2008 12:18 PM

Good rubber/cheap price= good deal:D

ezekielta Feb 15, 2008 12:39 PM

Too bad I only have 9.5 wide rims or they would be mine.

flynbya2 Feb 15, 2008 12:43 PM

Yep,
According to Michelin website 10.5"-11.5" rim


Thanks for the bump

flynbya2 Feb 22, 2008 11:15 AM

New lowered price $325 + shipping


All times are GMT -5. The time now is 08:53 PM.


© 2026 MH Sub I, LLC dba Internet Brands