335's
 

Im thinking about putting 335's on my T/A. What would be required to do it? I have the pro kit also. I tried to search it but nothing came up.

a big fucking hammer, grinder, and a sawz-all...

just alot of bfh!!!!! and the right backspace on your wheels, im runnin them with a sportline drop. oh and my fenders are rolled

+1 my 315 were a pain in the butt. I can't imagne another 20mm wider. I used a air hammer with flat head.

You buying 335s for a reason? 12 inch rims or something?

Most of us barely fit 315s on AFTER bfh'ing, fender rolling, cutting bump stops etc.

Sounds like you're in for some work--pictures please!

Yea i would also like to see what your plans are. I would love to fit 335s on mine

I asked this a little while back, and it doesn't sound to promising unless mini tubbing.

Yea if my rear was narrowed about .5" on each side I could make them work :)

I saw a guy on forum running 335 Michelin Pilots on ZR1 wheels with 50mm offset. If you can find a 335 that's not on the big side, kinda like nittos in 315 coming close to width to 275 GS-D3's, then it should work.

pics when done please!

A REALLY big hammer. I saw a car with 335's, it looked sick.

iv seen a camaro with 345's... YEA :drool:

335's with a PROKIT....NO TUBBING.??? NO NARROWING.??? I will wait to see this done without major smashing..

I've been thinking of going to the 335 hoosier drag radial on my car. I've already clearenced for the 325/50/15's, but that hoosier is a WIDE mofo.

There is a guy with a pearl white T/A that has done it on this site. It looks sweet but I do beleive he mini-tubbed it.

dopefedz had them on his trans am i believe. might want to contact him.

mine has 335 nittos on a sportline drop!!!!

https://ls1tech.com/forums/showthrea...t=#post9075650

do a search there are a few others!

I think im just gonna go with 315's. What do you guys think about putting like 1 inch wheel spacer in. Im just going through ideas so throw some ideas out there for me.

i wouldnt do spacers, and you would have to get longer studs to do a 1" spacer. why not to it right the first time?