plug to delete antenna?
Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 92
Likes: 1
From: Jerseyville, IL
plug to delete antenna? Is there a plug available to delete the power antenna on a Trans am? I would like to relocate my antenna inside the panel in front of the spare tire. I may lose a little reception in the process, but I'm not worried about it. I just want to plug the hole with a flush(ish) plug.
Get the hole welded up so that it's no longer there. Otherwise if you don't mind the hole being there, just leave the antenna where it is and unplug it so it doesn't go up and down.
You'll probably get no reception at all by putting an antenna inside a metal rear fender. You can hide it, but it needs to go in a place where radio waves can get through.
Here are some solutions:
https://ls1tech.com/forums/stereo-el...m-antenna.html
This is how you get it to look "good": https://ls1tech.com/forums/general-m...haved-you.html
Here are some solutions:
https://ls1tech.com/forums/stereo-el...m-antenna.html
This is how you get it to look "good": https://ls1tech.com/forums/general-m...haved-you.html
Just delete the dang thing and you'll never have to see it again. Thread Starter
Staging Lane
Joined: Sep 2013
Posts: 92
Likes: 1
From: Jerseyville, IL
The paint and body on the car is perfect so I don't want to weld it up. I didn't know if someone found a plug that would fill the hole semi flush. I did something similar to my 300ZX and put a Silverado antenna in the rear hatch area by the latch. It worked pretty good.
The paint and body on the car is perfect so I don't want to weld it up. I didn't know if someone found a plug that would fill the hole semi flush. I did something similar to my 300ZX and put a Silverado antenna in the rear hatch area by the latch. It worked pretty good.
