Blinker problem.
Blinker problem. My left turn signal is acting weird. When applied it stays solid (green) with no blinking. However my right turn signal is working perfectly fine. What is going on here guys? How do I fix this problem?
Joined: Nov 2003
Posts: 11,329
Likes: 346
From: Jacksonville, FL (originally from Toronto Canada)
Put on your hazard flashers and walk around the car looking for the bulb that doesn't flash. Either that bulb is burned out or the socket is corroded.
HIJACK HIJACK HIJACK. . .I'm stealing this thread. . .
how about when while the blinker is blinking, it decides to stop. . . and about 30 minutes later, it works fine again. . .
been happening to me...
check the other side and it's locked also...
go for a bit w/out using and then try, sometimes solid still, sometimes works. . .
ideas besides possible short somewhere?
btw, hazzards continue to work when the signals lock...
Thanks
how about when while the blinker is blinking, it decides to stop. . . and about 30 minutes later, it works fine again. . .
been happening to me...
check the other side and it's locked also...
go for a bit w/out using and then try, sometimes solid still, sometimes works. . .
ideas besides possible short somewhere?
btw, hazzards continue to work when the signals lock...
Thanks
Joined: Nov 2003
Posts: 11,329
Likes: 346
From: Jacksonville, FL (originally from Toronto Canada)
Originally Posted by Duffster
HIJACK HIJACK HIJACK. . .I'm stealing this thread. . .
how about when while the blinker is blinking, it decides to stop. . . and about 30 minutes later, it works fine again. . .
been happening to me...
check the other side and it's locked also...
go for a bit w/out using and then try, sometimes solid still, sometimes works. . .
ideas besides possible short somewhere?
btw, hazzards continue to work when the signals lock...
Thanks
how about when while the blinker is blinking, it decides to stop. . . and about 30 minutes later, it works fine again. . .
been happening to me...
check the other side and it's locked also...
go for a bit w/out using and then try, sometimes solid still, sometimes works. . .
ideas besides possible short somewhere?
btw, hazzards continue to work when the signals lock...
Thanks
TECH Enthusiast
Joined: Sep 2005
Posts: 717
Likes: 0
From: Georgetown, DE
Trending Topics
Launching!
Joined: Dec 2005
Posts: 281
Likes: 1
From: Athens, Alabama (North Alabama)
Also, the problem may be solved. Just a heads up, with what happened on my camaro. Water kept getting into the light housing, thus shorting out and busted my bulb, it about completely melted the female wiring housing for the bulb socket. So, i'd watch for that also if your bulb was busted and the housing was melted.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
