Where to ground gauges inside

Reply Subscribe

Thread Tools

Search this Thread

Nov 23, 2007 | 08:09 PM

jeffbab

Thread Starter

On The Tree

Joined: Jun 2007

Posts: 136

Likes: 0

Where to ground gauges inside

I understand there is a ground location near the front kick panel on the driver's side. Where exactly is it located? If I have to remove the kick panel, how do I do that? Is there a better ground near that location?

This is for some Autometer gauges I am installing.

Nov 24, 2007 | 08:54 AM

jeffbab

Thread Starter

On The Tree

Joined: Jun 2007

Posts: 136

Likes: 0

Can I just drill a hole in behind the A-Pillar trim piece and put a screw in there and use that as a place to ground it?

(the gauges are mounted in the A-pillar)

Nov 24, 2007 | 09:55 AM

sroach20

TECH Addict

iTrader: (31)

Joined: Dec 2002

Posts: 2,318

Likes: 1

From: houston, Texas

look about halfway down:
http://www.bfranker.badz28.com/fbody/alarm96up2.htm

Nov 25, 2007 | 08:20 PM

jeffbab

Thread Starter

On The Tree

Joined: Jun 2007

Posts: 136

Likes: 0

Thanks for the info.

I don't suppose there is anything on the driver's side I can use, is there?

Would rather not run a wire all the way over to the passenger side if I can avoid it.