Need quick help With LED Humount.
Need quick help With LED Humount. Has anyone had problems with getting their plastic radio bezel to go back over the Humount after you get it installed? The humount lights up like it should and trying to get the stock bezel back on. Surely I don't have to cut down the humount mount do I?
Also, I connected the black wire to the negative and the red wire to the positive coming from the radio to light the humount and when I was crimping the black together I hear a pop and now the radio won't power on. I tried to reset it on the unit like the manual says and nothing. Also, I blew the radio fuse and changed it out and still won't power on. Surely I didn't blow the receiver that quick? Any ideas? Need help.
Also, I connected the black wire to the negative and the red wire to the positive coming from the radio to light the humount and when I was crimping the black together I hear a pop and now the radio won't power on. I tried to reset it on the unit like the manual says and nothing. Also, I blew the radio fuse and changed it out and still won't power on. Surely I didn't blow the receiver that quick? Any ideas? Need help.
I'm still trying to find out what went wrong, I'm checking all fuses and wires. Cruise-in tomorrow and kind of bummed if the radio won't work.
Humount is a bezel that lights up and says Trans am or something like that. I think I'm selling it after I get the radio working,.
Humount is a bezel that lights up and says Trans am or something like that. I think I'm selling it after I get the radio working,.
You don't re-use it, You are suppose to leave it off. That's what the aluminum front piece is for. I just got mine in the mail this monday, and that's how I installed mine.
Sorry, my bad.
That piece should just pop back into place.
I had no problem with mine. everything went back together with out any clearance issues at all.
Hopefully you didn't fry your radio! Probably just blown a couple of fuses.
Good luck!
That piece should just pop back into place.
I had no problem with mine. everything went back together with out any clearance issues at all.
Hopefully you didn't fry your radio! Probably just blown a couple of fuses.
Good luck!
Trending Topics
I got it on, I guess the radio needed to slide just a hair back in Humount's plastic holder, my bezel went on ok after that. Looks great and glad I bought it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
