Stock Internal DD Z28
#1
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Apr 2009
Location: South GA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Stock Internal DD Z28
Well I finally reached my goal of a 11.99. The car has more it in but the weather wasn't very good. Car has full bolts ons, RPM Level 4 4L60E, and a Yank SS4000. Only suspension is heater hose mod and LCA's. Car weighs 3190 w/o me and 3380 with me. I have LCA relocation brackets to go on now. Racestars with 28x8.5 Et Drags.
1.90 8.03@88.07 12.49@111.24 DA 1200' Didn't launch hard
1.77 7.79@88.94 12.19@112.12
1.63 7.61@89.24 12.01@112.02
1.66 7.62@89.60 11.99@112.55 DA 585'
Previous best was a 1.70 7.67@90.36 12.03@112.69 with a TCI 3500 and stock trans.
Also with the 4000 I ran a 1.62 7.62@88.xx with an extra 200lbs in the car. This was with a DA of -600 about a month ago.
Time slip will be posted later. We didn't get the 11.99 on video but we did get the 12.01 on video so it will be poster later also.
Video in 3rd post
1.90 8.03@88.07 12.49@111.24 DA 1200' Didn't launch hard
1.77 7.79@88.94 12.19@112.12
1.63 7.61@89.24 12.01@112.02
1.66 7.62@89.60 11.99@112.55 DA 585'
Previous best was a 1.70 7.67@90.36 12.03@112.69 with a TCI 3500 and stock trans.
Also with the 4000 I ran a 1.62 7.62@88.xx with an extra 200lbs in the car. This was with a DA of -600 about a month ago.
Time slip will be posted later. We didn't get the 11.99 on video but we did get the 12.01 on video so it will be poster later also.
Video in 3rd post
Last edited by boostednismo; 03-21-2011 at 06:19 AM.
#7
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Apr 2009
Location: South GA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Thanks
Stock 3.23's. Yeah I'm certain there is some room to improve in my 60'. I have LCA relocation brackets waiting to go on and with more practice I'm sure it will go lower.
Thanks. How much did you gain with the FTRA?
Slips from two best runs. Didn't give much cool down on the last run cause I was trying to get back to the staging lanes before they closed.
Video of 12.19 run
http://www.youtube.com/watch?v=lIaF6...el_video_title
Thanks. How much did you gain with the FTRA?
Slips from two best runs. Didn't give much cool down on the last run cause I was trying to get back to the staging lanes before they closed.
Video of 12.19 run
http://www.youtube.com/watch?v=lIaF6...el_video_title
Trending Topics
#16
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Apr 2009
Location: South GA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
My car is around 150lbs lighter then a friends Trans Am with the same stuff removed but with full suspension and nitrous.
Race star's
Passenger and rear seats removed
Rear speaker panels
Spare tire & jack
A.I.R. & EGR
Tubular LCA's
I pull the passenger seat, spare tire & jack, and rear speakers while at the track. I keep them in the rest of the time.
Race star's
Passenger and rear seats removed
Rear speaker panels
Spare tire & jack
A.I.R. & EGR
Tubular LCA's
I pull the passenger seat, spare tire & jack, and rear speakers while at the track. I keep them in the rest of the time.
#17
12 Second Club
iTrader: (8)
Join Date: Dec 2007
Location: Wilkes-barre
Posts: 788
Likes: 0
Received 0 Likes
on
0 Posts
You give me hope for the upcoming season. I should be at a similar weight, but with 3.73s, a Yank 3500 and drag radials on 16" beater wheels.
Might take Atco to run the times, but all I care about is that 11.99999999 slip.
I've had the stall and gears in over a year now but have yet to run.
Might take Atco to run the times, but all I care about is that 11.99999999 slip.
I've had the stall and gears in over a year now but have yet to run.
#19
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Apr 2009
Location: South GA
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
You give me hope for the upcoming season. I should be at a similar weight, but with 3.73s, a Yank 3500 and drag radials on 16" beater wheels.
Might take Atco to run the times, but all I care about is that 11.99999999 slip.
I've had the stall and gears in over a year now but have yet to run.
Might take Atco to run the times, but all I care about is that 11.99999999 slip.
I've had the stall and gears in over a year now but have yet to run.
Man I miss those ZO6 rims on your car. Your signature was the reason that I started wanting C5 ZO6 rims.
What do you mean by the breaks on the slip?
Wow just saw the times in your sig. Mind pm'ing me your suspension setup.
#20
10 Second Club
iTrader: (12)
Join Date: May 2004
Location: Chicago IL/ Lake Geneva WI
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
The intervals are also called the breaks, so 60, 330, 660, 1000, 1320. My suspension is nothing special. I have 3 QA1's since the guy I bought them from ripped me off and sent me one with a seized adjuster. My driver rear shock is a stock DeCarbon. I have Pavlock Performance aluminum LCA's in the stock mounting location, stock panhard bar, stock torque arm, Metco Driveshaft loop/chassis brace. Still have a stock k-member, a-arms, 10 bolt, etc etc etc.