Just Joined the Club
05-19-2008, 11:53 AM
#1
9 Second Club
Thread Starter
iTrader: (3)
Join Date: Nov 2001
Location: Central, IL
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Just Joined the Club After finishing up installing my Midwest Chassis 9" Fabricated rear end with 4.56 gears, 3Ch abs spool, aluminum center section, 35 spline lightened axles, strange brakes and 28x10.5's on Billet Specialties wheels we headed to the track where after a few shakedown runs the car was running consistent 12.0@115 (4 in a row) and caring the front tires we adjusted the suspension net the best pass of the day.
60' - 1.660
330 - 4.934
1/8 - 7.635
MPH - 90.79
1000 - 9.961
1/4 - 11.901
MPH - 117.17
There is still a lot left in the car and some suspension adjustments (too much hook and was bogging off the line) and lightening the car up some I'm hoping to get the 60' down and run 11.5 - 11.6 this year.
A big thanks goes out to Eric @ Midwest Chassis for the rear end setup, and to the guys that stayed up with me till 4am getting it together.
60' - 1.660
330 - 4.934
1/8 - 7.635
MPH - 90.79
1000 - 9.961
1/4 - 11.901
MPH - 117.17
There is still a lot left in the car and some suspension adjustments (too much hook and was bogging off the line) and lightening the car up some I'm hoping to get the 60' down and run 11.5 - 11.6 this year.
A big thanks goes out to Eric @ Midwest Chassis for the rear end setup, and to the guys that stayed up with me till 4am getting it together.
05-20-2008, 02:06 AM
#3
9 Second Club
Thread Starter
iTrader: (3)
Join Date: Nov 2001
Location: Central, IL
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Cool yeh at least it runs the number now... first race of the year I still had the stock rear and was only running 13.0's. A little suspension tuning and it should be close.