Window Switch Wires?
#1
On The Tree
Thread Starter
iTrader: (21)
Join Date: Dec 2005
Location: Fairfield, CA
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Window Switch Wires?
I'm replacing a window motor in a 98z and when I removed the switch panel, all the wires popped out. I searched and only came up with wiring schematics and have no clue whats what. Does any one have a picture showing which colors go in each slot?
Heres the schematics
Heres the schematics
#2
Teching In
Join Date: Mar 2010
Location: Upstate New York
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
In order to replace the motor you need to pull the door panel off. once that is done remove the lower speaker in the door. Then you need to drill holes in the fiberglass panel where the rivets are that hold the motor. Then you need to drill out the rivets and pull the motor out. Pop in new one and your good to go. Sounds hard.............Just take your time.
#3
In order to replace the motor you need to pull the door panel off. once that is done remove the lower speaker in the door. Then you need to drill holes in the fiberglass panel where the rivets are that hold the motor. Then you need to drill out the rivets and pull the motor out. Pop in new one and your good to go. Sounds hard.............Just take your time.
#4
On The Tree
Thread Starter
iTrader: (21)
Join Date: Dec 2005
Location: Fairfield, CA
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
In order to replace the motor you need to pull the door panel off. once that is done remove the lower speaker in the door. Then you need to drill holes in the fiberglass panel where the rivets are that hold the motor. Then you need to drill out the rivets and pull the motor out. Pop in new one and your good to go. Sounds hard.............Just take your time.
Got that part figured out, just need to figure out which wires go in each slot of the window switch panel.