Best head Gasket out there for spray?????
#1
9 Second Club
Thread Starter
iTrader: (34)
Join Date: Mar 2005
Location: SPRINGFIELD MISSOURI
Posts: 2,248
Likes: 0
Received 0 Likes
on
0 Posts
Best head Gasket out there for spray?????
Just wanted some opinions on what is the best head gasket for nitrous. I have heard ls9 gaskets or MLS.
This is for a 300 shot of spray on a Iron block.
This is for a 300 shot of spray on a Iron block.
Trending Topics
#11
#12
10 Second Club
iTrader: (45)
Join Date: Sep 2004
Location: Richmond Hill, GA
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
I used the stock GM 5.7L MLS gasket on my old 346. I hit it with a 300 shot right out of the gate with no issues except a broken 12 bolt and tranny. I use the stock 6.2L MLS gasket now but I haven't been able to spray it yet.
#13
Launching!
iTrader: (4)
Join Date: Feb 2011
Location: New York Queens
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
I run the ls9 gaskets on my ls2 but it just went together. The copper spray you just hang the gasket spray both sides let it get tacky then through it on. My tuner runs the ls9's with copper spray on plenty of cars he built ranging from my car 420's-1100whp cars. I only spray 100 but will most likely work up to a 150 shot Friday at the rental.
#14
10 Second Club
iTrader: (10)
The copper spray helps coat and keep the gasket sealed to the deck.
It is a good trick. Some grudge racers I know also swear by using that block seal **** with copper in it for their radiator and cooling system.
I think it's mainly the copper that helps seal than the rest of that **** in block seal.
Copper head gaskets are what some heads up racers under big boost or nitrous.
It is a good trick. Some grudge racers I know also swear by using that block seal **** with copper in it for their radiator and cooling system.
I think it's mainly the copper that helps seal than the rest of that **** in block seal.
Copper head gaskets are what some heads up racers under big boost or nitrous.