Midwest Chassis & Performance fab rearends... new pics
Hey guys, can you tell me where you can get new emergency brake backing plate rubber boots? Does midwest sell them where you guys can just install new ones when I send you my stuff?
TECH Addict
iTrader: (41)
Joined: Feb 2007
Posts: 2,005
Likes: 2
From: Battlecreek, MI / Mansfield, OH
http://www.rmsautoparts.com/proddeta...0FH-Brake-Boot
This is the only place to get them, I replaced mine with these when I swapped my MWC 9" in.
http://www.rmsautoparts.com/proddeta...0FH-Brake-Boot
http://www.rmsautoparts.com/proddeta...0FH-Brake-Boot
Thread Starter
LS1Tech Premium Sponsor
iTrader: (26)
Joined: Dec 2006
Posts: 3,490
Likes: 5
From: Central Illinois
Of course they do... both cars were upgraded with full rearends, front and rear suspension and wheelie bars from MWC this season, along with Strange axles and center sections as well as Afco shocks. Powered by engines from ERL using Callies internals and top end from All Pro. Only the best for these guys!
**** Eric I knew Brian Black did but didnt know Ohio boys also. **** looks killer and nice to see it under a race car putting down the numbers and winning races, Really show why I bought my rear from you and something I could afford and beat on it at the track every weekend I can. Should be enough motiavation for anybody wanting a new rear.
I know I have asked this before but sometimes things change. This is able to be installed in a 3rd gen correct? I am moreso wondering about the chassis mount for the torque arm, how does that get installed on the car? Welded and if so are there included templates or anything to make sure its installed correctly?
yes these guys fabricate the entire rear end themselfs in house so I would imagin you can tell them you need one for a 3rd gen and they will make one thats right for it
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I know I have asked this before but sometimes things change. This is able to be installed in a 3rd gen correct? I am moreso wondering about the chassis mount for the torque arm, how does that get installed on the car? Welded and if so are there included templates or anything to make sure its installed correctly?
Depending on your location and if this is an issue for you we can do the instal in house.
I know this info is probably somewhere in the 60+ pages, dug for a while but couldn't find it. What is the official break-in procedure for these? I know 80w90 non synthetic with additive (motive 4.11 with clutch posi). Can i do all the break-in on jack stands, or is combination jack stands and driving better?
Also, does anyone have a picture of a 4ch rear with brake lines installed into the factory bracket(from the third member side).
Also, does anyone have a picture of a 4ch rear with brake lines installed into the factory bracket(from the third member side).
Did my install tonight. This is thing is pure sex. 
Everything fit perfect, all bolts included and top notch service. If you're lurking in this thread and haven't ordered one, order one NOW!
Everything fit perfect, all bolts included and top notch service. If you're lurking in this thread and haven't ordered one, order one NOW! I had my payments broken down into 3 payments. I didn't even ask for it that's just how they broke it down. They only require ~ 30% down. The next payment was roughly 40%, then the last payment right before shipping was the same as the initial down payment of 30%.
I'm glad you are happy, if you need anything or have questions please let us know. Looks great.
So when I opened the bag with instructions and stickers with my order, I see the two small stickers and the one large one. I'm like "Sweet, this large one is going right on the rear once it's out of the crate!". After I unbolt the rear from the crate, I see there is already one placed there! 
My buddy that helped do the install reflected back on his friend who bought a Vortech for his 2010 Challenger. They left out the sticker. He was like "I spent $6000 and the didn't even give me a sticker?!? Damn it!!" He was ready to unbolt it and send it back. LOL.
Moral of the story, we like our stickers.
My buddy that helped do the install reflected back on his friend who bought a Vortech for his 2010 Challenger. They left out the sticker. He was like "I spent $6000 and the didn't even give me a sticker?!? Damn it!!" He was ready to unbolt it and send it back. LOL.
Moral of the story, we like our stickers.