Fuel rails for a stock LS3 intake that aren't red?
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Aug 2002
Posts: 529
Likes: 0
From: Readsboro, VT
Fuel rails for a stock LS3 intake that aren't red? Does anybody make fuel rails for a stock LS3 intake in a color that isn't red? All I can find for LS3 rails are FAST, Aeromotive and BBK, and they're all red. Everybody else that's making aftermarket rails in natural/black seem to only offer them for FAST intakes and not the stock intakes.
If I have to I could always powdercoat a set of FAST rails, but I'd rather not go through the hassles if I can just find a damned black or natural set to begin with.
If I have to I could always powdercoat a set of FAST rails, but I'd rather not go through the hassles if I can just find a damned black or natural set to begin with.
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Aug 2002
Posts: 529
Likes: 0
From: Readsboro, VT
Edit: wilson's description mentions ls2/7 even though their cart doesn't show it. Perhaps an email is in order.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Aug 2002
Posts: 529
Likes: 0
From: Readsboro, VT
http://www.mastmotorsports.com/2010/news-view.php?id=33
Thanks. Now I just need to find a part number and a price. Mast's website really isn't very helpful.
Thanks. Now I just need to find a part number and a price. Mast's website really isn't very helpful.
We used the Summit ones on my 76 intake. The injector spacing is all the same on all the rails. The mounting tabs and hardware are whats different. My son made custom hold downs for ours. Lowes has some nice metric sized bolts and washers.
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Aug 2002
Posts: 529
Likes: 0
From: Readsboro, VT
Those Wilsons look great. Where did you buy them from? According to the part number on the packaging, those are the rails for ls1/ls6 intake manifolds. I don't think those will work with the LS3 manifold without making my own mounting brackets.
I found the Mast rails at Pace, but they were shown as "discontinued". I emailed Pace and their response said that Mast no longer sells fuel rails.
I emailed Mast to find out if they're still available or not, but I haven't heard back yet.
I found the Mast rails at Pace, but they were shown as "discontinued". I emailed Pace and their response said that Mast no longer sells fuel rails.
I emailed Mast to find out if they're still available or not, but I haven't heard back yet.
Last edited by Jim85IROC; Feb 24, 2012 at 09:26 PM.
TECH Regular
Joined: Sep 2008
Posts: 425
Likes: 1
From: Scottsdale, Arizona
I ordered them from Summit and yes they sent the wrong ones. The only difference is the mounting tabs, the rails are the same. So they just sent me the new mounting tabs and everything worked out fine.
Thread Starter
TECH Enthusiast
iTrader: (6)
Joined: Aug 2002
Posts: 529
Likes: 0
From: Readsboro, VT
Well, I got an email back from Mast. They confirmed that their LS3 rails are discontinued.
I also got an email back from Wilson. They stated that they offer rails for LS1/LS6/LS7 only.
*****.
I also got an email back from Wilson. They stated that they offer rails for LS1/LS6/LS7 only.
*****.
