S60 installed!!!! Thanks Carl @ CRP
#1
12 Second Club
Thread Starter
iTrader: (31)
Join Date: Oct 2010
Location: Kansas City, MO
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
S60 installed!!!! Thanks Carl @ CRP
I purchased a Strange S60 from Carl at CRP and installed it about a month ago. Finally got it broke in and its amazing! The installation was a piece of cake and everything installed with no problems. I ended up going with 3.73,detroit locker, chromemoly pinon, lca relo brackets, stock width, and powder coated black. The quality is top notch and i'd recommend the rear to anyone. I haven't been able to get it to the track yet to see if times changed much but so far it seems just as powerful. The rear feels extremely solid and there is not one bit of gear whine. If your needing a rear, you should definitely give Carl a call.
Thanks Carl!!!
Thanks Carl!!!
#5
12 Second Club
Thread Starter
iTrader: (31)
Join Date: Oct 2010
Location: Kansas City, MO
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Only bad thing can say about the process is with Strange, they offered to fix the error on powder coating and said he get back in touch with me and never did. So im still waiting for the call!
#6
12 Second Club
Thread Starter
iTrader: (31)
Join Date: Oct 2010
Location: Kansas City, MO
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
I think you'll be very satisfied once you get it and you won't find better customer service! Let us know how it goes once you get it
Trending Topics
#12
12 Second Club
Thread Starter
iTrader: (31)
Join Date: Oct 2010
Location: Kansas City, MO
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
He's a awesome guy to deal with!!! Install was really easy, just like putting a 10 bolt in. Yes it was a direct fit, only mod i had to do was cut a brake bracket i believe to fit on the LCA relo brackets. I ended up going with the strange chromemoly drive shaft.
#13
11 Second Club
iTrader: (8)
I just ordered mine today.
Can you explain more about the brake bracket? Do you have any pics on what you had to do?
Carl also gave me a good place to purchase the parking brake lever boots since mine was ripped.
http://www.rmsautoparts.com/proddeta...0FH-Brake-Boot
#14
12 Second Club
Thread Starter
iTrader: (31)
Join Date: Oct 2010
Location: Kansas City, MO
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Thanks,
I just ordered mine today.
Can you explain more about the brake bracket? Do you have any pics on what you had to do?
Carl also gave me a good place to purchase the parking brake lever boots since mine was ripped.
http://www.rmsautoparts.com/proddeta...0FH-Brake-Boot
I just ordered mine today.
Can you explain more about the brake bracket? Do you have any pics on what you had to do?
Carl also gave me a good place to purchase the parking brake lever boots since mine was ripped.
http://www.rmsautoparts.com/proddeta...0FH-Brake-Boot
Last edited by 97camaro383; 05-06-2012 at 07:23 PM.
#16
TECH Apprentice
iTrader: (31)
Join Date: Jul 2010
Location: Loganville, Ga
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
This Is what Carl suggested I go with as my car is my DD and maybe makes 20 1/4 mile passes a year. 35-spline S-Trac, 35-spline Strange Street/Strip axles with 3.150" bearings, 1/2" or M12 wheel studs (IDK what one to go with), 1350 pinion Yoke, and 4.10 gears, BMR LCA Relocation brackets and ill also be ordering the Strange Chrome-moly drive-shaft.
#17
12 Second Club
Thread Starter
iTrader: (31)
Join Date: Oct 2010
Location: Kansas City, MO
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
This Is what Carl suggested I go with as my car is my DD and maybe makes 20 1/4 mile passes a year. 35-spline S-Trac, 35-spline Strange Street/Strip axles with 3.150" bearings, 1/2" or M12 wheel studs (IDK what one to go with), 1350 pinion Yoke, and 4.10 gears, BMR LCA Relocation brackets and ill also be ordering the Strange Chrome-moly drive-shaft.
#19
TECH Apprentice
iTrader: (31)
Join Date: Jul 2010
Location: Loganville, Ga
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a pretty solid setup, i strayed away from the s-trac because i wanted to spray a 150 out of the hole and im around 550rwhp on spray. He said that the s-trac was good for about 600rwhp. I think i gotta pic out of 5/8" studs or the m12 which are stock i believe.
#20
12 Second Club
Thread Starter
iTrader: (31)
Join Date: Oct 2010
Location: Kansas City, MO
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
I went with the detroit locker option ( 70 bucks more ) and he sad it should handle everything i can throw at it. So far its solid and very street friendly, only time i ever notice it is when i back up. Sometimes you hear the tires slip a bit when backing but thats it.