LS1 into a replica 66 shelby cobra?
#2
TECH Veteran
iTrader: (3)
Join Date: Feb 2004
Location: Lynnwood, WA (North of Seattle)
Posts: 4,729
Likes: 0
Received 0 Likes
on
0 Posts
I know that you can put the LS1/6 motors into the Factory Five Cobra replicas..........lotta folks have done that. Don't know about any other brands of replicas though.
#3
On The Tree
Join Date: Jun 2005
Location: Prescott, Arizona
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Blown Chevy 350 Cobra
I helped my good friend build a 1967 427 SC Cobra replica (they get mad when you call 'em kit-cars) with a blown Chevy 350 in it and a Muncie M22 trans. He's my next door neighbor now, and he's got a different Cobra 427 SC today with a real Ford 427 side oiler in it.
If that massive boat anchor fits, anything should fit, providing the repli-car frame is like the traditional dual tubular frame rail construction in the REAL Cobras. Factory Five is even better, their frame design has even MORE room.
If that massive boat anchor fits, anything should fit, providing the repli-car frame is like the traditional dual tubular frame rail construction in the REAL Cobras. Factory Five is even better, their frame design has even MORE room.
#5
http://www.gdcarsusa.com/news.php
check out this company....their kit is set up specifically for the LS series
check out this company....their kit is set up specifically for the LS series
#6
TECH Veteran
iTrader: (3)
Join Date: Feb 2004
Location: Lynnwood, WA (North of Seattle)
Posts: 4,729
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SPG
http://www.gdcarsusa.com/news.php
check out this company....their kit is set up specifically for the LS series
check out this company....their kit is set up specifically for the LS series
#7
just did that!
I've had a 5.0Mercedes Engine with a 4-speed in it, all I wanted was a 6-speed, but to convert the tranny to make it fit to an Mercedes engine would have cost me almost the same what I paid for a used LS1-T56 combo!!!
To put the LS1-engine into my Cobra was a piece of cake, since the Mercedes has overhead cams, the LS1 is not as wide as the Mercedes, it is also about 4inches shorter, which gave me the opportunity to put the Motor 4inches farther back so I have a little more wheight on the rear wheels.
The problem was the tranny, its much longer and wider than the 4speed, so I had to cut the trans-tunnel out to make it bigger.
dont put anything else in your Cobra than a LS1 or LS6!!!
my car wheighs about 2000lbs, acceleration is just awesome!!!!
I've had a 5.0Mercedes Engine with a 4-speed in it, all I wanted was a 6-speed, but to convert the tranny to make it fit to an Mercedes engine would have cost me almost the same what I paid for a used LS1-T56 combo!!!
To put the LS1-engine into my Cobra was a piece of cake, since the Mercedes has overhead cams, the LS1 is not as wide as the Mercedes, it is also about 4inches shorter, which gave me the opportunity to put the Motor 4inches farther back so I have a little more wheight on the rear wheels.
The problem was the tranny, its much longer and wider than the 4speed, so I had to cut the trans-tunnel out to make it bigger.
dont put anything else in your Cobra than a LS1 or LS6!!!
my car wheighs about 2000lbs, acceleration is just awesome!!!!
Last edited by LS1AC-Cobra; 08-10-2005 at 01:49 PM.
Trending Topics
#8
TECH Veteran
iTrader: (3)
Join Date: Feb 2004
Location: Lynnwood, WA (North of Seattle)
Posts: 4,729
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LS1AC-Cobra
just did that!
I've had a 5.0Mercedes Engine with a 4-speed in it, all I wanted was a 6-speed, but to convert the tranny to make it fit to an Mercedes engine would have cost me almost the same what I paid for a used LS1-T56 combo!!!
To put the LS1-engine into my Cobra was a piece of cake, since the Mercedes has overhead cams, the LS1 is not as wide as the Mercedes, it is also about 4inches shorter, which gave me the opportunity to put the Motor 4inches farther back so I have a little more wheight on the rear wheels.
The problem was the tranny, its much longer and wider than the 4speed, so I had to cut the trans-tunnel out to make it bigger.
dont put anything else in your Cobra than a LS1 or LS6!!!
my car wheighs about 2000lbs, acceleration is just awesome!!!!
I've had a 5.0Mercedes Engine with a 4-speed in it, all I wanted was a 6-speed, but to convert the tranny to make it fit to an Mercedes engine would have cost me almost the same what I paid for a used LS1-T56 combo!!!
To put the LS1-engine into my Cobra was a piece of cake, since the Mercedes has overhead cams, the LS1 is not as wide as the Mercedes, it is also about 4inches shorter, which gave me the opportunity to put the Motor 4inches farther back so I have a little more wheight on the rear wheels.
The problem was the tranny, its much longer and wider than the 4speed, so I had to cut the trans-tunnel out to make it bigger.
dont put anything else in your Cobra than a LS1 or LS6!!!
my car wheighs about 2000lbs, acceleration is just awesome!!!!
#9
Launching!
iTrader: (3)
Join Date: May 2005
Location: SoCal
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LS1AC-Cobra
just did that!
I've had a 5.0Mercedes Engine with a 4-speed in it, all I wanted was a 6-speed, but to convert the tranny to make it fit to an Mercedes engine would have cost me almost the same what I paid for a used LS1-T56 combo!!!
To put the LS1-engine into my Cobra was a piece of cake, since the Mercedes has overhead cams, the LS1 is not as wide as the Mercedes, it is also about 4inches shorter, which gave me the opportunity to put the Motor 4inches farther back so I have a little more wheight on the rear wheels.
The problem was the tranny, its much longer and wider than the 4speed, so I had to cut the trans-tunnel out to make it bigger.
dont put anything else in your Cobra than a LS1 or LS6!!!
my car wheighs about 2000lbs, acceleration is just awesome!!!!
I've had a 5.0Mercedes Engine with a 4-speed in it, all I wanted was a 6-speed, but to convert the tranny to make it fit to an Mercedes engine would have cost me almost the same what I paid for a used LS1-T56 combo!!!
To put the LS1-engine into my Cobra was a piece of cake, since the Mercedes has overhead cams, the LS1 is not as wide as the Mercedes, it is also about 4inches shorter, which gave me the opportunity to put the Motor 4inches farther back so I have a little more wheight on the rear wheels.
The problem was the tranny, its much longer and wider than the 4speed, so I had to cut the trans-tunnel out to make it bigger.
dont put anything else in your Cobra than a LS1 or LS6!!!
my car wheighs about 2000lbs, acceleration is just awesome!!!!
Can you post more pictures please? I want to show this to my neighbor who has a 351W in his car that's only putting out 248RWHP however he thinks that his motor is the best but it sucks! LOL.
#12
TECH Veteran
iTrader: (3)
Join Date: Feb 2004
Location: Lynnwood, WA (North of Seattle)
Posts: 4,729
Likes: 0
Received 0 Likes
on
0 Posts
Damn dude, that is one looking ride.
Nice to see someone go with something other then the traditional (which also looks good) blue w/white stripe paint combo on a Cobra.
BTW, that rear suspension looks IRS I presume?
Nice to see someone go with something other then the traditional (which also looks good) blue w/white stripe paint combo on a Cobra.
BTW, that rear suspension looks IRS I presume?
#13
Originally Posted by LS1AC-Cobra
ok guys, here you go:
"Don't ya like custom fabrication...... "
Now..... someone do me justice by swapping in a modded C5R motor...... or future LS7 engine!