how to port a throttle body?
#1
TECH Enthusiast
Thread Starter
Join Date: Apr 2002
Location: Canada
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
how to port a throttle body?
Ok i'v bin looking into throttle bodys and MAF.. and decided to do both eventually.. but someone told me that theres no gain from stock with MAF's?? does anyone have proof of this? and about throttle bodys.. i could get a BBK or i could port mine?? or should i get the BBK and port it?? also is it worth it to port the MAF? i would rather buy a new one and have the stock as a spare just incase for emergency's.. and aftermarket MAF's don';t come ported do they? and would u gain power bye porting them? thanx for any help
#2
TECH Senior Member
iTrader: (6)
Re: how to port a throttle body?
Many of our sponsors sell ported MAF's. I recommend them over the BBK. For anything under a big CI car it's overkill.. and overpriced.
If you plan to port it yourself... you basically want to remove the ridge that runs around in front of the blade. just be careful not to grind in the area where the blade seals to close the throttle.
<small>[ June 13, 2002, 10:03 AM: Message edited by: WILWAXU ]</small>
If you plan to port it yourself... you basically want to remove the ridge that runs around in front of the blade. just be careful not to grind in the area where the blade seals to close the throttle.
<small>[ June 13, 2002, 10:03 AM: Message edited by: WILWAXU ]</small>
#3
TECH Apprentice
Join Date: May 2002
Location: Jacksonville
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to port a throttle body?
When I first heard of folks porting their own TB's or buying one already ported I was curious what material was being removed so I had a look at my TB and really couldn't tell where you guys are coming up with any gains here.. Nothing really jumped out that looked like it could obviously be removed.. Can anyone describe with a little more detail what area of the TB needs work?
THanks
<small>[ June 13, 2002, 10:50 AM: Message edited by: StealthStalkerLS1 ]</small>
THanks
<small>[ June 13, 2002, 10:50 AM: Message edited by: StealthStalkerLS1 ]</small>
#4
TECH Senior Member
iTrader: (6)
Re: how to port a throttle body?
Look at the pictures in this thread and compare them to your stock TB. https://ls1tech.com/ubb/cgi-bin/ulti...=000528#000017
or Thunder Racings Port TB
or
Speed, Inc's....
or Thunder Racings Port TB
or
Speed, Inc's....
#5
TECH Enthusiast
Join Date: Jan 2002
Location: West Monore
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to port a throttle body?
I would get my throttle body port and polish which will most likely give you one or two MPH at the end of the track--top end. Most avid racers do this mod---there is a reason,trust me. I highly recommend to do away with the BBK throttle body--been there, done that---waste of time and money and nothing but trouble---again trust me. Mark Shanner does a very good job. MY MPH went up by two on a hot day. I bought a GMAF and still use it. I have no experience with stock MAF. I have MAFT to gain a tenth in the past. Also, Jantzer has a very good product (TB)for reasonable price. Cheers and good luck. Kent.
#6
TECH Enthusiast
Thread Starter
Join Date: Apr 2002
Location: Canada
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to port a throttle body?
hmm this is tuff.. i kinda did wana buy the whole throttle body set up.. and BBK is the only company i can think of that makes em for our cars.. but u say there no good eh? then i guess im better off with the stock one? anyone else have problems with the BBk ??
Thanx
Thanx
#7
Staging Lane
Join Date: Dec 2001
Location: casa grande
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to port a throttle body?
<img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> BBK SUCK......... GET A SHANER S2 <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> YOU WONT BE DISSAPOINTED......
Trending Topics
#11
TECH Enthusiast
Thread Starter
Join Date: Apr 2002
Location: Canada
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to port a throttle body?
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 2001CamaroGuy:
<strong>What do you all mean the BBK suck? is it because they are exspensive for what you get or is it that they are really "bad"? I waiting on delivery of a basicly new BBK from a guy for $300.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">hey man.. can u keep me updated when u get the BBK on your car?? its the only company of throttle bodys out here.. so plz help me out. thanx
<strong>What do you all mean the BBK suck? is it because they are exspensive for what you get or is it that they are really "bad"? I waiting on delivery of a basicly new BBK from a guy for $300.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">hey man.. can u keep me updated when u get the BBK on your car?? its the only company of throttle bodys out here.. so plz help me out. thanx