LSX block weight
#7
That's what i was thinking, if i was gonna go with a 427 i think i would go
with an LSX block. Especially since i still would wanna use my ATI kit at low
boost ofcourse
But in last september i got a sweet '02 SS with 2,000 original miles
It's to perfect looking right now but after just selling my WS6 with the mods
in my sig. i'm going thru power withdrawal..lol. I do plan on doing mods to the SS , just not what. I like the AFR heads, or the Terminators, or PRC's S1 LS6 heads and a Vig3200. We'll see.
with an LSX block. Especially since i still would wanna use my ATI kit at low
boost ofcourse
But in last september i got a sweet '02 SS with 2,000 original miles
It's to perfect looking right now but after just selling my WS6 with the mods
in my sig. i'm going thru power withdrawal..lol. I do plan on doing mods to the SS , just not what. I like the AFR heads, or the Terminators, or PRC's S1 LS6 heads and a Vig3200. We'll see.
Last edited by BlackNiteWS6; 04-05-2008 at 11:30 PM.
Trending Topics
#8
On The Tree
iTrader: (3)
Join Date: Feb 2005
Location: Houston, TX
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
The LSX is approx. 80 lbs heavier than the 6.0L iron block, which itself is about 75 lbs more than the LS1 aluminum. All told, the LSX weighs just about 250 lbs before it is bored out to size.
#10
Oh man...thats right 80lbs isn't nothing to worry about for piece of
mind. A few weeks ago i was thinking of selling the ATI kit( also new ) to get the LSX
block and just save to build a 427 or even a 454 Both nastalgic chevy
engine sizes. But with just selling the WS6 i have a little $$$ to get the
SDConcepts belt tensioner, a TR blower cam and i have a brand new set of
GTP S2 6.0 heads( again was thinking of selling ) that Craig and i talked hours on the phone about runner size,
valve sizes and other stuff. I even had the heads flowed local to me and at .600 lift they
flow over 305cfm. I just want a nice strong street setup until i can build a
serious motor. I have time and in no rush to deside yet. Thanks everyone for your input.
mind. A few weeks ago i was thinking of selling the ATI kit( also new ) to get the LSX
block and just save to build a 427 or even a 454 Both nastalgic chevy
engine sizes. But with just selling the WS6 i have a little $$$ to get the
SDConcepts belt tensioner, a TR blower cam and i have a brand new set of
GTP S2 6.0 heads( again was thinking of selling ) that Craig and i talked hours on the phone about runner size,
valve sizes and other stuff. I even had the heads flowed local to me and at .600 lift they
flow over 305cfm. I just want a nice strong street setup until i can build a
serious motor. I have time and in no rush to deside yet. Thanks everyone for your input.
#12
Thanks, i'll check theirs out. I was looking at TSP's 454LSX short block. With the upgrades to Callies crank, and ARP stud kit, and Callies rods the cost is $6,600.00
That's a good price. But thanks for the info on LME's 454. I like the stuff they've done
like the Maggie blower install.
That's a good price. But thanks for the info on LME's 454. I like the stuff they've done
like the Maggie blower install.
#13
12 Second Club
iTrader: (48)
you do realize he said it is 80lbs heavier then a 6.0l iron block right?? which means it is like 150lbs heavier then an ls1 block. If you are staying na it really wouldn't be worth it since you would need alot of extra hp to make up the weight difference. The lsx block is really designed for people that are trying to build an all out extreme motor
#14
10 Second Club
iTrader: (10)
Join Date: Feb 2004
Location: Manteca, CA
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, i'll check theirs out. I was looking at TSP's 454LSX short block. With the upgrades to Callies crank, and ARP stud kit, and Callies rods the cost is $6,600.00
That's a good price. But thanks for the info on LME's 454. I like the stuff they've done
like the Maggie blower install.
That's a good price. But thanks for the info on LME's 454. I like the stuff they've done
like the Maggie blower install.
Originally Posted by GMHTP
One of the things that makes the LSX so tough is the sheer amount of cast iron that goes into it, causing the standard deck version to weigh in at a full 225 lbs. With the weight of your average LS1 or LS2 aluminum block being about half this--and a production iron block falling somewhere in between--a vehicle with an LSX Bowtie Block will incur somewhat of a weight penalty. But this extra mass is thanks to the GMPP team having added extra material in several critical areas, including around the cam tunnel, around all of the bores, under the deck surface, and about the head bolt holes. Mr. Bates explains why this is and how it relates to Warren Johnson. "We're trying to accommodate everyone with this block, and if it wasn't for trying to make it economical to cast in any kind of volume, then sure, there are places where meat could have been taken out. But we had to evaluate: is it better to have an extra 5 or 10 lbs, or to make the block $700 more expensive to the consumer? The good news is that those that want to lighten the block for their application can hook up with their CNC house of choice and take an extra 20, 30, or even 40 lbs out of it.
(Copy and pasted from our build sheet)
454" LSX Shortblock. Balanced, blue printed and assembled. GM LSX block, Callies Compstar 4340 4.125" crankshaft, Callies 6.125" H beam rods w/ ARP 2000 7/16" bolts, Wiseco 4.187" custom forged nitrous pistons, Childs & Albert Fire Power rings .043" .043" 3mm (for reduced friction & high heat applications), Clevite MS 2199 H main brgs, Clevite CB663 H rod brgs, Dura Bond CH-23 cam brgs, ARP main studs.
Last edited by Azrael; 04-06-2008 at 05:27 PM.
#15
you do realize he said it is 80lbs heavier then a 6.0l iron block right?? which means it is like 150lbs heavier then an ls1 block. If you are staying na it really wouldn't be worth it since you would need alot of extra hp to make up the weight difference. The lsx block is really designed for people that are trying to build an all out extreme motor
how much heavier the block was over the LS1/LS7 block. I didn't ask about
the 6.0 block. Seems strange the block is that much heavier than a 6.0 since it's iron. And since they are both dimentionally the same size, small blocks.
I can see 100lbs more than a LS1 block cause the bores will be bored out which will drop alittle weight. I just saw on GM's site the block weighs 225lbs.
An LS1 is nearly 95lbs. I look at it this way, it's like driving with a 130lbs girl in the car with ya all the time. Sure it's gonna be heavier, but i'm not out to beat John Force i'm just looking at options on motor sizes, plus i still plan on running a little boost. A 454 would make 550 to 575rwhp or more plus tons of tq...over 550ft/lbs or so. I don't think an extra 130lbs would slow my car down too much.
#16
Most sources put the standard deck version at ~225 lbs. IMHO Weight can always be taken out of the car though!
Our basic short block from Bryan at LME was $6,599, and all you have to do is look at his reputation. That is for:
(Copy and pasted from our build sheet)
454" LSX Shortblock. Balanced, blue printed and assembled. GM LSX block, Callies Compstar 4340 4.125" crankshaft, Callies 6.125" H beam rods w/ ARP 2000 7/16" bolts, Wiseco 4.187" custom forged nitrous pistons, Childs & Albert Fire Power rings .043" .043" 3mm (for reduced friction & high heat applications), Clevite MS 2199 H main brgs, Clevite CB663 H rod brgs, Dura Bond CH-23 cam brgs, ARP main studs.
Our basic short block from Bryan at LME was $6,599, and all you have to do is look at his reputation. That is for:
(Copy and pasted from our build sheet)
454" LSX Shortblock. Balanced, blue printed and assembled. GM LSX block, Callies Compstar 4340 4.125" crankshaft, Callies 6.125" H beam rods w/ ARP 2000 7/16" bolts, Wiseco 4.187" custom forged nitrous pistons, Childs & Albert Fire Power rings .043" .043" 3mm (for reduced friction & high heat applications), Clevite MS 2199 H main brgs, Clevite CB663 H rod brgs, Dura Bond CH-23 cam brgs, ARP main studs.
No doubt about LME thats for sure. I've been impressed with them since
they were a sponsor. That's true lighter control arms, K-members, plus the motor is an animal, the difference in weight for the street/some racing is marginal.
#17
12 Second Club
iTrader: (48)
Oh man thanks for pointing that out. I didn't catch that since i was asking
how much heavier the block was over the LS1/LS7 block. I didn't ask about
the 6.0 block. Seems strange the block is that much heavier than a 6.0 since it's iron. And since they are both dimentionally the same size, small blocks.
I can see 100lbs more than a LS1 block cause the bores will be bored out which will drop alittle weight. I just saw on GM's site the block weighs 225lbs.
An LS1 is nearly 95lbs. I look at it this way, it's like driving with a 130lbs girl in the car with ya all the time. Sure it's gonna be heavier, but i'm not out to beat John Force i'm just looking at options on motor sizes, plus i still plan on running a little boost. A 454 would make 550 to 575rwhp or more plus tons of tq...over 550ft/lbs or so. I don't think an extra 130lbs would slow my car down too much.
how much heavier the block was over the LS1/LS7 block. I didn't ask about
the 6.0 block. Seems strange the block is that much heavier than a 6.0 since it's iron. And since they are both dimentionally the same size, small blocks.
I can see 100lbs more than a LS1 block cause the bores will be bored out which will drop alittle weight. I just saw on GM's site the block weighs 225lbs.
An LS1 is nearly 95lbs. I look at it this way, it's like driving with a 130lbs girl in the car with ya all the time. Sure it's gonna be heavier, but i'm not out to beat John Force i'm just looking at options on motor sizes, plus i still plan on running a little boost. A 454 would make 550 to 575rwhp or more plus tons of tq...over 550ft/lbs or so. I don't think an extra 130lbs would slow my car down too much.
#18
10 Second Club
iTrader: (10)
Join Date: Feb 2004
Location: Manteca, CA
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
yeah it wont slow your car down to much if you have a power adder and you could always take the extra weight out of your car with some other form of weight reduction..the only thing that sucks is that all that extra weight is just at the front of the vehicle which is why i wouldn't want to use one if i was staying na
So really you have to add weight all over the place to support the power...
#19
yeah it wont slow your car down to much if you have a power adder and you could always take the extra weight out of your car with some other form of weight reduction..the only thing that sucks is that all that extra weight is just at the front of the vehicle which is why i wouldn't want to use one if i was staying na
#20
TECH Enthusiast
iTrader: (6)
Join Date: Apr 2007
Location: Ashland, KY
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Go LSX - even if you stay NA - your talking possible 600hp with a streetable build?? Where are you going to get that with the other blocks? I dunno 'bout you guys, but HP is the name of the game, and I think the LSX block is all about more HP. Who cares if it weighs a lil more? 100 pounds is a only 0.10 seconds in a 1/4 mile! WHO CARES!!!!