someone help with clearance issue
#1
someone help with clearance issue
i am putting a stock ls1 motor together and i just bought some ls6 317 casting prc heads that are 66cc and shaved 30 thousands i am wanting to go with the f14 highlift cam. should there be any clearance issuue's with this setup.
#4
Did you take an additional .030 off or is that what they came with? I have those heads with their V3 cam which is similar to the F14 and have not had a clearance problem. However I would run the Stock gaskets since they are a little taller and not the Cometic ones.