Power to Starter?
#1
Power to Starter?
So I pulled my trans to rebuild it and I had everything put back together. I went to plug my battery in and my starter started cranking the motor. my wires are in the right spots and my ground is connected. I played with my ignition switch for a little bit. Any other suggestions?
#3
10 Second Club
iTrader: (45)
Join Date: Sep 2004
Location: Richmond Hill, GA
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Check again. Sounds like your main battery wire and ignition wire on the starter are touching. If you can't visibly see it, trace it back through the harness. It could also be a bad starter solenoid.