The Big Switch
#1
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Sep 2004
Location: Kalifornia
Posts: 1,138
Likes: 0
Received 0 Likes
on
0 Posts
The Big Switch
Backround:
Solid Roller Build for PSCA True Street Or Limited Street Classes
The Question:
At what lift and duration is it just pointless to run a Hydraulic Setup as opposed to a solid roller?*
What is the Largest Hydraulic Cam being used?**
* I know SR's ramp up more quickly and allow for more rpm because of the increased control in the valvetrain. For the purposes of this question assume Ti valves and a matched and properly installed spring is being used.
** Please don't mention the MS3, G5X4 or T-rex as they are suitable for dd cars.
Solid Roller Build for PSCA True Street Or Limited Street Classes
The Question:
At what lift and duration is it just pointless to run a Hydraulic Setup as opposed to a solid roller?*
What is the Largest Hydraulic Cam being used?**
* I know SR's ramp up more quickly and allow for more rpm because of the increased control in the valvetrain. For the purposes of this question assume Ti valves and a matched and properly installed spring is being used.
** Please don't mention the MS3, G5X4 or T-rex as they are suitable for dd cars.