Ωmega

iTrader: (28)

Alright, I can't figure this out. Pulled the shift ****, upper counsel, and disconnected everything. Then I tried to pull up the counsel, moved it around, shifted it each way and the next, and I can't get it to come out. It's either getting stuck on the underside of the dash (right under the HVAC controls) or its getting stopped by the E-brake handle. Is there some kind of trick to it?
Let me know, thanks.

Rob

FloridaZ

I know to get mine out i had to pull on the ebrake like a *****. Had it damn near straight up.

Black Z/28

I think that's pretty much the key, gotta get the ebrake handle as close to vertical as possible. Watch out, you can scratch the ebrake handle. If I were to do it again, I would tape the ebrake handle.

Ωmega

iTrader: (28)

Cool guys, thank a lot. I'll run out there again tomorrow and try again with it pulled up more.

99FormulaM6

iTrader: (21)

theres a little thing on the ebrake gear thing you press to make it so you can get it vertical.

Ωmega

iTrader: (28)

Got it out, I just pulled as hard as I could and it was enough to get it out, thanks again guys!
Rob