Possible Trans problem after changing injector slope
#1
Registered User
Thread Starter
Join Date: Apr 2009
Location: North Carolina
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Possible Trans problem after changing injector slope
I have a 2000 Camaro z28. I used the Diablo Predator to check my long fuel trim and it was 25% over. I then changed the injector slope to -26 to compensate for the difference. From a stand still, and general driving, the acceleration and power improved. However, if I am rolling along and "floor" the accelerator (as if to pass another car) the RPMs shoot up to 6000-6500 for a few seconds with no change in acceleration(like I put it in neutral); then it feels like it slowly engages and I speed-up. It feels and sounds exactly the same as when you stomp it from a stopped position and you have to wait for the tires to stop spinning and catch traction to go forward, but the tires aren't spinning. (Which having the power to break traction at 65mph would be nice I must admit...lol) Does anyone know what caused this or how to fix it? I theorized that maybe it was too rich at WOT since the change and I should lean it for WOT but the car does fine with WOT from a standstill... kinda just guessing now.
Thanks in advance,
Jason
Thanks in advance,
Jason