Slow 346

iTrader: (33)

Changing from an A4 to a Turbo 400. There is a cluster of wires on my factory shifter. Do I have to slpice into a wire for my new NSS on my B&M shifter or is there another way?


Thanks

Reckless

iTrader: (9)

You are correct! Most after market shifters come with a microswitch that engages (or disengages) in neutral.

Slow 346

iTrader: (33)

Your correct, mines does have the switch. Any ideas on how to wire it?

kp

iTrader: (34)

Never done an auto swap but it looks like grounding the orange/black wire (see pic) allows it to start. The PN switch is on the side of the shifter and thats where the wire should be. Just ground one side of the microswitch (or use the ground in the harness) and hook the orange/blk to the other side..

Slow 346

iTrader: (33)

Ill have to check that out, thanks!