converter shudder?
12-30-2009, 06:39 PM
#1
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Location: Bridgewater,Mass
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
converter shudder? well ever sense replacing my broken tailshaft after it went pop at over 130
i get a vibrating-shudder out of the tranny when i let on and off the gas at 65-80mph and if i very lightly press the gas its a constant shudder. it only happens at those speeds. car is a 98z28 and i installed a ta relo crossmember along with the new tailshaft. any input is appreciated
i get a vibrating-shudder out of the tranny when i let on and off the gas at 65-80mph and if i very lightly press the gas its a constant shudder. it only happens at those speeds. car is a 98z28 and i installed a ta relo crossmember along with the new tailshaft. any input is appreciated 
01-01-2010, 09:37 AM
#5
Launching!
iTrader: (11)
Join Date: May 2009
Location: Wisconsin
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
see if it make a diffrents if it is OD or drive. This may tell you if the lock up clutch is fried. But I would bet you have something broken or bent in the convertor.
01-02-2010, 11:28 AM
#6
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Feb 2009
Location: Bridgewater,Mass
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
ill have to wait til spring to drive it again because of all this crazy de-icer they have been spraying on the roads up here lately. i kinda have a feeling its the lock up tho. i knew i should of got in on that yank group buy!
