Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

vibration problem

Thread Tools
 
Search this Thread
 
Old 02-03-2010, 03:33 PM
  #1  
Teching In
Thread Starter
 
Justin0828's Avatar
 
Join Date: Apr 2008
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default vibration problem

just had a new tranny put in and i had to get my u-joints pressed in before i could try the tranny out.

since i cranked the car up there is a horrible vibration. starting from a stop its not too bad but around 50mph+ while giving it gas and as well as my foot being off the gas the car vibrates pretty bad.

could a bad tranny mount cause this? any1 have any ideas?
Old 02-03-2010, 04:19 PM
  #2  
TECH Apprentice
iTrader: (11)
 
Circa307's Avatar
 
Join Date: Mar 2009
Posts: 374
Likes: 0
Received 0 Likes on 0 Posts

Default

any rear suspension mods done?
Old 02-03-2010, 04:21 PM
  #3  
Teching In
Thread Starter
 
Justin0828's Avatar
 
Join Date: Apr 2008
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default

all stock
Old 02-03-2010, 07:53 PM
  #4  
Teching In
 
Cameano's Avatar
 
Join Date: Nov 2009
Location: Georgia
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default

Did you visually inspect the new work done?
Old 02-04-2010, 05:44 PM
  #5  
Registered User
 
toofastws6's Avatar
 
Join Date: Feb 2010
Location: west palm beach fl.
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Are you running a stock trans. mount or a poly mount?




All times are GMT -5. The time now is 11:04 AM.