Trinity Trans Brake...Help me Please
07-08-2010, 12:17 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Location: Edmonton, CANADA
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
Trinity Trans Brake...Help me Please Well i was one of the unfortunate people to put a trinity trans brake in my 4L80E...Needless to say nothing but problems, No 1st Gear, No Reverse, and for some reason no 3rd or 4th....Not sure how many of these problems are common using their transbrake but now I need to pull it apart and get it fixed, my question now is what all do I need to fix this thing? Which parts? New Valve body I will assume and what else? Any help would be much appreciated, cars been down for 2 years and just finished it would really enjoy driving it. Thanks Again!
07-08-2010, 12:26 PM
#2
Wow,
I thought all his junk would be in the scrap pile by now.
And he'll tell you he is a Hydramatic engineer and he has dozens of them working fine
Yes,
Replace the VB.
I can't say on the internal parts, probably best to tear it back down and start over. I had to do it several times because of the junk he was selling and lies he was telling.
I thought all his junk would be in the scrap pile by now.
And he'll tell you he is a Hydramatic engineer and he has dozens of them working fine
Yes,
Replace the VB.
I can't say on the internal parts, probably best to tear it back down and start over. I had to do it several times because of the junk he was selling and lies he was telling.
