Tranny advice for an 02 B4C with mods.
#1
Teching In
Thread Starter
Join Date: Sep 2010
Location: Fremont, Ne
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Tranny advice for an 02 B4C with mods.
I have a 2002 Z28 that was built this winter and I drove it like 6 times and the tranny is toasted already.
Mods
SLP Lid
85mm throttle body
85mm intake manifold
Heads and cam kit from Texas Speed Torque V3 cam
Bigger oil pump
1 7/8 primary tubed headers
Y-pipe
Magnaflow muffler
Upgraded fuel pump and wiring from Texas Speed
2500 stall
42lb injectors
Have it rebuilt or buy heavier one from a vendor?
Mods
SLP Lid
85mm throttle body
85mm intake manifold
Heads and cam kit from Texas Speed Torque V3 cam
Bigger oil pump
1 7/8 primary tubed headers
Y-pipe
Magnaflow muffler
Upgraded fuel pump and wiring from Texas Speed
2500 stall
42lb injectors
Have it rebuilt or buy heavier one from a vendor?
#2
im looking into that myself...my car is also a B4C car. The performabuilt transmissions look good for the price. How do you like the V3 cam? Im thinking about getting the same setup for my car with the TSP PRC 2.5 heads