6l80e 2010 trans in 65 Chevelle
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: Dec 2006
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
6l80e 2010 trans in 65 Chevelle
I have ls3 backed by a 6l80e from a 10 camaro. I am using a cut stock camaro harness. Car is in limp mode and shows 158mph on hp tuners. I have read the stock car uses the abs and body control module to control trans. I spoke with a tech today from street and performance. He says we need to run wires from obd port to tcm on trans then from tcm to ECM. He says this will work. My question is has anyone heard of this? If so any help would be great. In order to tune it we need a vehicle speed signal not sure what to do?
#2
I have ls3 backed by a 6l80e from a 10 camaro. I am using a cut stock camaro harness. Car is in limp mode and shows 158mph on hp tuners. I have read the stock car uses the abs and body control module to control trans. I spoke with a tech today from street and performance. He says we need to run wires from obd port to tcm on trans then from tcm to ECM. He says this will work. My question is has anyone heard of this? If so any help would be great. In order to tune it we need a vehicle speed signal not sure what to do?
Last edited by RevGTO; 04-24-2013 at 11:45 PM.