kwik_ls1

iTrader: (60)

Hello, I am hoping somebody can help me. I have a 2000 Turbo Trans Am with a 4L80E that was originally a T56 car. The trans went into limp mode because the trans lost power from the PCM. However, I don't have the Speartech wiring diagram or instructions. Does anyone have a copy they could email me or text to me? I just have to verify which wire power comes from. Currently the car will only go into reverse and 2nd gear until I can figure out the wiring. Any help anyone can give me would be greatly appreciated. You can email the instructions to me at tmorales@wfwhelan.com or feel free to text me anytime at 313-790-5592.

Thanks.

Tony

mrvedit

This 4L80E wiring diagram might be useful:
http://www.msgpio.com/manuals/mshift/4L80E/4L80e.html

Pin E on the trans needs to have +12V. I don't know what color that is on a Speartech harness, although I would suspect Red.

kwik_ls1

iTrader: (60)

Thanks man. I do appreciate it. Hopefully I can figure out why the trans isn't getting power now. lol I have to look at all of the pins that go into the pcm now and see where it isn't getting power. Thanks again. This should be a useful reference.

truckdoug

iTrader: (26)

4l80e needs 12v keyed on pin E of the round gray plug. usually it's pink.

kwik_ls1

iTrader: (60)

Got it. Thanks fellas. Running perfect again. Loose wire....