Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

T-56 to 4l80 swap code p0717

Thread Tools
 
Search this Thread
 
Old 08-15-2016, 04:50 PM
  #1  
Launching!
Thread Starter
 
VIPERSLYR's Avatar
 
Join Date: May 2007
Location: Norwood,Ont canada
Posts: 202
Likes: 0
Received 1 Like on 1 Post

Default T-56 to 4l80 swap code p0717

Just finished my 4l80 swap in my 99 formula using speartech harness t-56 to 4l80. The trans shifts real nice and going threw all gears but am getting code p0717 has any body else had this code come up after swap. TIA
Old 09-09-2016, 11:45 AM
  #2  
TECH Senior Member
iTrader: (34)
 
DopeFedZ's Avatar
 
Join Date: Apr 2002
Location: Houston TX
Posts: 5,231
Received 20 Likes on 14 Posts
LS1Tech 20 Year Member
Default

Do you have the iss harness plugged into the right sensor on the side of the transmission? I believe there are two sensors on the driver side. I don't remember if it's the one closest to the motor or furthest that the harness gets plugged into.
Old 09-09-2016, 03:30 PM
  #3  
10 Second Club
iTrader: (16)
 
Firebirdmuscle's Avatar
 
Join Date: Jan 2012
Location: Mississippi
Posts: 1,203
Received 13 Likes on 13 Posts
LS1Tech 10 Year
Default

Iss is in the front and vss is the plug in the rear. You just reuse the original vss plug, but should have added in the iss into the pcm. But to answer your question man, i didn't have any codes when I swapped mine.



Quick Reply: T-56 to 4l80 swap code p0717



All times are GMT -5. The time now is 03:41 PM.