4l80e with drum brake
10-20-2016, 08:15 PM
#2
TECH Fanatic
It has a Parking Pawl, You have to get up too the Allison 2000 series before you deal with "No Park"
The difference will be a Roller Output bearing, Tailhousing, & Bolt-on Yoke.....Units from medium duty trucks are usually beat up pretty bad, Unless it's from a low mileage motorhome......I'd walk unless it's really cheap.
The difference will be a Roller Output bearing, Tailhousing, & Bolt-on Yoke.....Units from medium duty trucks are usually beat up pretty bad, Unless it's from a low mileage motorhome......I'd walk unless it's really cheap.
10-20-2016, 09:50 PM
#3
TECH Enthusiast
Thread Starter
Join Date: Sep 2016
Location: North Jersey
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
It was out of a rack body 3500HD.
I knew that I'd need a new tailshaft and housing and yeah I was going to have it gone through anyway.
Got it for $100 so even if it needs a couple of hard parts , it's not that bad.
I knew that I'd need a new tailshaft and housing and yeah I was going to have it gone through anyway.
Got it for $100 so even if it needs a couple of hard parts , it's not that bad.