Turbo-400, people who has done this help me out.
10-12-2004, 10:03 PM
#1
TECH Apprentice
Thread Starter
Join Date: Jul 2004
Location: Carolina
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Turbo-400, people who has done this help me out. I had a guy build me a th400 and custom converter for my car. I want to make sure i have EVERYTHING i need when i do this installe probabily this weekend.
1) i already installed the BMR track pack torque arm, cross mount, and subframes
2) BMR cross member
3) Hurst shifter
4) and to get the speedo workign the guy who built my transmission attatched some cable/sensor thing from a GM truck to the transmission that i have to plug into something, ill figure it out when i see it.
I know i still need a drive shaft, but i have to measure how long i need it to be and will do that after everythign else is installed and ready to go unless someone already knows what length it needs to be i can get right on it.
I think thats all i needs besides the obvious fluid.
1) i already installed the BMR track pack torque arm, cross mount, and subframes
2) BMR cross member
3) Hurst shifter
4) and to get the speedo workign the guy who built my transmission attatched some cable/sensor thing from a GM truck to the transmission that i have to plug into something, ill figure it out when i see it.
I know i still need a drive shaft, but i have to measure how long i need it to be and will do that after everythign else is installed and ready to go unless someone already knows what length it needs to be i can get right on it.
I think thats all i needs besides the obvious fluid.
10-12-2004, 11:41 PM
#3
TECH Senior Member
Join Date: Apr 2004
Location: Texas
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by badass 2002 z28
don't go off other people's cars...measure for your own driveshaft. Each car is a little different.
hes right. after my 9" install my DS was 2 inchs short. 