Is the Vigi3200 right for my nitrous setup?
#1
Teching In
Thread Starter
Join Date: Jul 2004
Location: Phoenix, AZ
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Is the Vigi3200 right for my nitrous setup?
My 02 SS is bone stock with a new NX direct port kit currently running a 180 shot. Most of my fun comes from a roll.....so i need a converter that works well with a large shot and has good top end power. I run Nitto DR's most of the time. Future mods include Pacesetter LT's, O/R y-pipe, valvesprings, LS1 edit, and thats about it. Thanks
#2
tight converters, like yours, are better for spray.
I ran a Vig3200 for two years on a 125 shot - it rocked!!!
If you are going to go H/C, I would go to a Yank PYE34-3600
I ran a Vig3200 for two years on a 125 shot - it rocked!!!
If you are going to go H/C, I would go to a Yank PYE34-3600
#3
TECH Fanatic
iTrader: (1)
Vig 3200 is a great converter. Perfect combo for a street/track car, or for street racing. However the converter hits hard from a line, nittos may not hold it on the street. I've never got them to hook at the track, I use BFG's or et streets.
BTW, don't buy ls1 edit, its a rip. Refer to the pcm tuning section
Buy hptuners. www.hptuners.com
BTW, don't buy ls1 edit, its a rip. Refer to the pcm tuning section
Buy hptuners. www.hptuners.com