Need a little Help - LS1TECH

Go Back   LS1TECH > CHASSIS, SUSPENSION, APPEARANCE > Automatic Transmission
Log In 

Automatic Transmission
4L60E | 4L80E | TH350 | TH400 | TH2004R | Powerglide | Converters | Shift Kits
Sponsored by
PerformaBuilt Transmissions

Need a little Help

Thread Tools Search this Thread
Old 02-28-2006, 10:31 PM   #1
Staging Lane
TheAntiRice's Avatar
Trader Rating: 0
Join Date: Oct 2005
Location: DETROIT!!!!!!!!!!!!!
Posts: 96
Send a message via Yahoo to TheAntiRice
Default Need a little Help

hey guys im removing my tranny to take to the tranny shop.Does any one know how to remove the trans lines from the tranny looks like plastic clips around it or something..........Next the bad part is i stripped a tourque converter bolt its one of those hex bits any body got a way i can remove it easier its stripped or can i remove the tranny and leave the torque converter in and pull the trann and get it out later??????
TheAntiRice is offline   Reply With Quote
Old 03-02-2006, 01:50 PM   #2
Teching In
Trader Rating: 1
Join Date: Aug 2003
Posts: 35

the lines are held in with c clips under the plactic you are talking about. slide the plastic down the line and get a seal pick or tiny screw driver to remove the c clips and pull the line out. As far as the TC bolts get grade 8 replacement bolts, I forget what size they are, from your local hardware store. They will work fine and are regular bolts instead of hex heads. hope this helps
str8evl is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


All times are GMT -5. The time now is 01:24 AM.