aovall1

iTrader: (11)

Hey guys I have a 00 A4 t/a and if I instaled a 3600 10" converter, would I have any problems with the transmission slipping? What im asking is there anything bad that may happen after I have put on the new 3600 on?

Dom

iTrader: (2)

You'll be fine.

BlackHawk T/A

iTrader: (3)

As long as you install a good cooler you will be fine.

Strahley

iTrader: (4)

Just make sure to put in a bigger cooler to go along with it

NEED2SPEEDLS1

cooler is a most. get a nice tune and you will love that thing@!

2000SLPZ28

i put in my yank 3600 stall after a transmission guy telling me not too, and after everybody telling me that i spent too much on it. i also put on a 10/7" cooler on it too. so far no probs. im running almost an 8.2 in the 1/8. and that basicly on just exhaust and intake. its a little loose, and will take some getting use too. but watch out, turn the traction controll off, and youll be in for a ride!

05_GTO

It shouldn't slip but it will feel loose and take some getting use to. When I had mine in at first I wanted it taken out, but a week of driving it and I got use to it.