Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

94 a4

Thread Tools
 
Search this Thread
 
Old 07-25-2006, 10:51 AM
  #1  
Teching In
Thread Starter
 
94lt116's Avatar
 
Join Date: Jul 2006
Location: New Port Richey
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default 94 a4

when i have my transmission perform button on after a few runs it hits redline like 3 times before it shift 1-2 is this normal... my rear end use to whine when i went around sharp corners now it clunks and grinds and i feel the car bumping up and down around slow sharp corners.. what is this thanks jeff
Old 07-25-2006, 10:54 AM
  #2  
Teching In
 
Nflaz28's Avatar
 
Join Date: Aug 2005
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default

check your fluid in your rear end if recently changed make sure you added the limited slip addative.
Old 07-25-2006, 11:02 AM
  #3  
TECH Regular
 
Jeff 97 Formula's Avatar
 
Join Date: May 2005
Posts: 465
Likes: 0
Received 3 Likes on 2 Posts

Default

I too would like an answer on the 1-2 shift beyond redline. I started experiencing this ever since I had the transmission flushed. 2-3 is perfect.
Old 07-25-2006, 11:13 AM
  #4  
Teching In
Thread Starter
 
94lt116's Avatar
 
Join Date: Jul 2006
Location: New Port Richey
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

with my perform button off my car shifts perfect i think the factory just increased redline a bit... i checked the differential last weekl we put new fluid and limited slip addative in it.. it could be my posi unit i guess




All times are GMT -5. The time now is 11:24 PM.