bhz28

iTrader: (35)

I currently have a B&M (no fan) but I was thinking of switching to a cooler that has a fan mounted on it. Anyone know if that would actually help more, I would assume so but just looking for opinions. Thanks.

Urban Legend

iTrader: (5)

I use a Perma Cool with a big fan on it. 900 CFM to be exact. It works like a champ and the fan comes on automatically at 150 degrees.

firebirdman469

iTrader: (3)

I just bought a B&M 24,000 GVW....I hope it is sufficient.

TXws6

iTrader: (10)

Hayden tranny cooler here! It came with my SS3600 when i ordered from Yank

GregWS6&z28

iTrader: (8)

it will be fine

koolaid_kid

iTrader: (21)

Personally, I would just mount a thermostat controlled fan on the one you have, if you want a fan.

99Hawk262

iTrader: (19)

I run a B&M 24K mounted dope style and a Hayden mounted on the AC condenser. With the ST3500, the B&M was enough. When I added the SS4000, I had to add the Hayden.

bhz28

iTrader: (35)

well I was also going to get a bigger cooler as well.

Hennytime

iTrader: (33)

i got the big 28k bm. i know its overkill for my trans, but the way i see it these trannies need all the help they can get and this was all they had in stock. i put mine under the front bumper and it gets plenty of air, ill take a pic later

One Bad Z

iTrader: (1)

I have the b&m 24k now but plan to upgrade very soon. Temps get too high for my current trans & converter setup. Bigger the better.

bhz28

iTrader: (35)

well I need a bigger one for sure, I have a 4L80E and a 4000 stall, I was thinking the fan would help A LOT.