Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Please Help!!!

Thread Tools
 
Search this Thread
 
Old 06-29-2008, 10:35 AM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
LS2Z28monster's Avatar
 
Join Date: May 2008
Location: orlando, fl
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Default Please Help!!!

Okay so heres the deal. I got a 98 z28 with a LS2 vengeance vindicator 2 cam and som nitrous. The car has a stock 4l60e. So I was driving down the road goin about 40 and hit some water and started hydroplaning. I kept the car straight and when it caught dry concrete it jerked back straight. Now heres the problem. when I went to hit the gas the car hesitated real bad then shifted real rough, as I hit the gas it started shaking real bad under my *** so i pulled over. The car revs up fine in neutral and all bellhousing and drive shaft bolts are tight. Any ideas on the problem? Need help guys
Old 06-30-2008, 09:15 AM
  #2  
TECH Senior Member
iTrader: (7)
 
Ragtop 99's Avatar
 
Join Date: Nov 2001
Location: Bethesda, MD
Posts: 9,491
Likes: 0
Received 1 Like on 1 Post

Default

does it coast ok or make noise?
Old 06-30-2008, 10:22 AM
  #3  
FormerVendor
 
Gilbert@Ace Racing's Avatar
 
Join Date: Oct 2006
Location: D-F/W
Posts: 3,123
Likes: 0
Received 2 Likes on 2 Posts
Default

I would recommend you take the time to give it a long visual inspection. It is possible that your extension housing is broken, usually it will leak pretty good though.

It is also possible that the rear axle spider gears are broken.

Good Luck with it.

g




All times are GMT -5. The time now is 03:59 PM.