summoner

I know this is the carb section.. but hear me out.

Since I am going Carb on my LS1 (Potentially to TBI Efi later on) I am going to keep it as simple as possible, my car doens't have power steering (1974 Holden) so I won't be running that, nor will I be running an A/C unit.

I have had a look on Summit for a belt to suit this setup but unsure on what length would be required? There are search options to narrow it down but they only cover "alternator, power steering and water pump" as the minimum. But I do see shorter lengths as options..

So I guess my question is, for those who have done the swap and only run the bare minimum accessories (no P/S or A/C) what length belt best suits the application?

Thanks in advance.

Doug G

UOP

The way pictured in this thread is how I did it. Post #4

https://ls1tech.com/forums/conversions-hybrids/874719-alternator-waterpump-only-setup-belt-number.html?styleid=27

summoner

Awesome thanks for the replies