4 barrel throttle body where to mount IAT sensor
09-06-2016, 09:30 AM
#1
On The Tree
Thread Starter
4 barrel throttle body where to mount IAT sensor Hi
As title say i switch my Fast intake manifold to super Victor with Accufab 4500 4 barrel throttle body
But i confued where to mount IAT sensor if any one did the same swap kindly post pic for mount location
And if there is different way to solve this issue
Thanks
As title say i switch my Fast intake manifold to super Victor with Accufab 4500 4 barrel throttle body
But i confued where to mount IAT sensor if any one did the same swap kindly post pic for mount location
And if there is different way to solve this issue
Thanks
09-07-2016, 12:15 PM
#2
FormerVendor
iTrader: (1)
Join Date: Nov 2008
Location: Santa Ana, CA. USA
Posts: 2,157
Likes: 0
Received 16 Likes
on
16 Posts
Air Temperature Sensing My guess is your need is for N/A fitment of a temperature sensor.
My method is the most simple, mount on the firewall near the air filter.
The air, under hood, is what the engine will be feed.
This IS what you want to sense not the heat of the manifold, fuel reversion, exhaust gases.
Lance
My method is the most simple, mount on the firewall near the air filter.
The air, under hood, is what the engine will be feed.
This IS what you want to sense not the heat of the manifold, fuel reversion, exhaust gases.
Lance
