SLP runner/vortec HELP
12-27-2008, 09:45 PM
#1
TECH Resident
Thread Starter
iTrader: (2)
Join Date: Oct 2007
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
SLP runner/vortec HELP I need ideas on how to fix this TPI problem
Our problem was that the runner was forcing the injector upward and sideways. We didn't have the clearance we needed in that little sliver of a space between the injector and the fuel rail and then between the injector and the runner.
there's physically no room for the injector plug on #7 when the runner is installed. We tried everything we could think of, but we just couldn't get it to fit. It seems my only option is to grind material off the inside of the runner
Our problem was that the runner was forcing the injector upward and sideways. We didn't have the clearance we needed in that little sliver of a space between the injector and the fuel rail and then between the injector and the runner.
there's physically no room for the injector plug on #7 when the runner is installed. We tried everything we could think of, but we just couldn't get it to fit. It seems my only option is to grind material off the inside of the runner
