STKN1STGEAR

iTrader: (1)

Hi,
I have a 99 SS Camaro. While tuning the new LS2, I ran into a fuel pressure issue. I purchased a racetronics fuel pump and need to install it. I don't want to drop the tank to do this.

My question is:
Can I cut an access panel above the tank from inside the car?
Has anyone done this?
What do I need to look out for?
Does anyone have pictures of the underside with the tank out?

Thanks in advance
Al

STKN1STGEAR

iTrader: (1)

Does anyone have any info on this?
Thx
Al

prostock_bigblock

iTrader: (11)

yes u can cut the panel and plenty of people r using this method rather than dropping the tank and all the miss.

search u will find a write ups about it.

prostock_bigblock

iTrader: (11)

http://www.gonicd.com/intankinstall/...mpinstall.html

STKN1STGEAR

iTrader: (1)

Thanks for the info.
I did cut the deck and replace the pump.
It works great.
Thankx
Al

prostock_bigblock

iTrader: (11)

how hard was it? I am planning to do mine soon, any advise?