4l60E to t56 swap?
#1
Registered User
Thread Starter
Join Date: Mar 2008
Location: Winston Salem
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
4l60E to t56 swap?
Hey guys. I'm a mustang guy doing a trans swap for a really good friend of mine. He has a 1994 Camaro z/28 w/ the automatic trashed in it for the second time in a year or so. He called me up and asked if would do the conversion for him. I am an ASE cert. technician and do this professionally, but my side work at home is usually Ford related. But, a car is a car so I said I would go for it. He already picked up a T56 with bell housing and ordered a LS1 driveshaft. I was hoping maybe some of you guys had some experience with this and could help me find out what exactly will be required for a complete swap, or maybe you had some necessary parts for sale. Thanks in advance guys. I'm new to this site, but I'm sure he's not done with upgrades for a while, so I will be checking out some more stuff on here. Maybe, just maybe, I could change my stubborn ways and go bowtie.
#3
TECH Enthusiast
iTrader: (16)
I have done it! Not too bad. The hardest part for me was drilling holes and mounting the master cylinder. Other than that it is just a lot of manual labor.
There is alot of info on this on the board. Do a search! 94 not that much different than my 98!
Start here: https://ls1tech.com/forums/manual-transmission/200480-m6-a4-a4-m6-conversion-info-requested.html
There is alot of info on this on the board. Do a search! 94 not that much different than my 98!
Start here: https://ls1tech.com/forums/manual-transmission/200480-m6-a4-a4-m6-conversion-info-requested.html