LS1 in 69 MGB with carb kit!
03-26-2009, 11:49 AM
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Location: Los Lunas,NM
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
LS1 in 69 MGB with carb kit! whats up guys
so i ordered the edelbrock carb kit, and a holley 750 dp and a 100hp nitrous plate. Im looking into cams, heads and what im going to do about headers.
I have a 9" that im going to start narrowing down this weekend. Iv talked to different people on the MGBs and some say it wont hold the torque at all, some say it will be fine wiht a full cage(which i plan on doing), some say i will need to build a tube frame under it. Im not sure yet what im going to do!
ill be laying in the engine and trans this weekend to check clearences and fittment. It a convertible also
If any one has input id appreciate it!
so i ordered the edelbrock carb kit, and a holley 750 dp and a 100hp nitrous plate. Im looking into cams, heads and what im going to do about headers.
I have a 9" that im going to start narrowing down this weekend. Iv talked to different people on the MGBs and some say it wont hold the torque at all, some say it will be fine wiht a full cage(which i plan on doing), some say i will need to build a tube frame under it. Im not sure yet what im going to do!
ill be laying in the engine and trans this weekend to check clearences and fittment. It a convertible also
If any one has input id appreciate it!
