Southeast Vista

It looks like a easy job, but any do's or dont's out there, any tips?

Jimbo1367

I believe you need to make sure the rear of the pan is perfectlyinline with the rear or the block iffin iI recall correctly. I am sure someone will chime in soon. I am just learning too. Sorry. LOL
Jim

downset71

yes its important for sealing.prob 10x more critical if running any tranny that has the bolt holes along bottom( like a 6 speed, etc). standard 350, 400, 200 or 700 isnt that important. just use a straight-edge ruler along back of block and tighten down

jomomma

iTrader: (39)

also be very easy when installing the oil pickup tube. its easy to strip the little bolt if your not careful!

downset71

true..also remember pickup tube o-ring!!!! and a nice dab of red or black silicone in each corner of pan.....