Converting GM part to Inverted flare fitting size?
#1
On The Tree
Thread Starter
Join Date: Mar 2006
Location: Dallas, TX
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Converting GM part to Inverted flare fitting size?
I searched this site for a conversion but can't find any info on the inverted flare fitting that fits in the 4L60E tranny for the cooler lines. The GM Part # is: 8637742. Anyone know the equivalent part/size at Summit or Jegs?
Jeff
Jeff
#3
If you try to screw 1/4" NPT in you may crack the case. It is not supposed pipe thread.
This should be what you're after. http://www.summitracing.com/parts/ATI-925137
I realize this is not exactly what you're after, but it's what I've used in the past.
This should be what you're after. http://www.summitracing.com/parts/ATI-925137
I realize this is not exactly what you're after, but it's what I've used in the past.
Last edited by jbsjunk; 11-01-2009 at 12:31 AM.