Molded heater hoses
07-12-2010, 10:30 PM
#1
Molded heater hoses Thought this might be a helpful link for everyone. http://www.daycoproducts.com/daycowe...2!OpenDocument Just found it tonight. My brothers car has very little clearance between the heater hose outlets and the passenger side A-arm, and the piece of regular heater hose that we had put in ripped. Dayco had 5/8 and 3/4 heater hoses with a 90 degree on the end and a 36" tail that fit perfectly with a little trimming.
Heres another dayco link that might be helpful for finding radiator hoses and belts (serpentine and V) for custom apps. http://www.daycoproducts.com/online-catalog-1?part_type=10 You can type in the dimensions of the radiator hose you are looking for and it comes up with pictures of the available hoses so you can see the bends
They also have part numbers for hose reducer bushings and plastic elbows/ T`s here http://www.daycoproducts.com/daycowe...d!OpenDocument
Heres another dayco link that might be helpful for finding radiator hoses and belts (serpentine and V) for custom apps. http://www.daycoproducts.com/online-catalog-1?part_type=10 You can type in the dimensions of the radiator hose you are looking for and it comes up with pictures of the available hoses so you can see the bends
They also have part numbers for hose reducer bushings and plastic elbows/ T`s here http://www.daycoproducts.com/daycowe...d!OpenDocument
Last edited by G-Body; 04-21-2018 at 11:46 AM.
The following users liked this post:
Zanie (03-06-2023)
