3.4 conversion to 5.3
#4
Launching!
iTrader: (15)
do you have a harness? do you have a transmission that will work with that 5.3 because the 3.4 won't.
why don't you google what you want to do and see what comes up? thats how most of us have done it
#5
11 Second Club
iTrader: (14)
Join Date: Jun 2007
Location: Encinal/Kingsville, Texas
Posts: 840
Likes: 0
Received 1 Like
on
1 Post
Ill start a list to get you on your way:
Transmission (depending on trans u may need crank adapter)
Transmission mount/cross member
PCM(with V.A.T.S. Removed)
Wire harness (fbody will work best)
Walbro intake fuel pump
LSX kmember with mounts
Car intake, tb, injectors, and fuel rails
Car accessories
Flexplate
Driveshaft (depends on trans choice)
Not sure if fuel lines and radiator are the same.
Headers/manifolds
fbody pan
lid set up
There are quite a few threads on here with plenty of info. Read a few of them(even if it's not in the same vehicle) and you will start to understand what all it takes.
Transmission (depending on trans u may need crank adapter)
Transmission mount/cross member
PCM(with V.A.T.S. Removed)
Wire harness (fbody will work best)
Walbro intake fuel pump
LSX kmember with mounts
Car intake, tb, injectors, and fuel rails
Car accessories
Flexplate
Driveshaft (depends on trans choice)
Not sure if fuel lines and radiator are the same.
Headers/manifolds
fbody pan
lid set up
There are quite a few threads on here with plenty of info. Read a few of them(even if it's not in the same vehicle) and you will start to understand what all it takes.
Last edited by kdavis; 09-17-2010 at 03:44 PM.